เครื่องตัดพลาสม่าด้วยอากาศ 220V ตัดด้วยมือ CUT-60Di
| แคตตาล็อกสินค้า | ทั้งหมด |
|---|---|
| แบรนด์ | TOPWELL |
| ข้อมูลจำเพาะของสินค้า | CUT-60Di |
| แรงดันไฟฟ้าอินพุตที่กำหนด | 1PH ~ 230V ± 15% |
| แม็กซ์ กำลังโหลดไฟฟ้า | 9.7KVA |
| ครีบออกที่ได้รับการจัดอันดับสูงสุด | 30-60A |
| ความสามารถในการตัดคุณภาพ (Hand-held) | 10mm |
| กำลังตัดสูงสุด (มือถือ) | 20mm |
| แรงดันขาออกที่ได้รับการจัดอันดับ | 104V |
| แรงดันไฟฟ้ากระแสสลับสูงสุด | 280V |
| การประกัน | รับประกัน 1 ปี |
| ขนาด | 540X240X480mm |
| น้ำหนัก | 19kg |
| ท่าเรือ | Ninbo / เซี่ยงไฮ้ |
| การชำระเงิน | L/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal |
| Updated | 2024/11/25 |
-
CUT-60Di
Professional-grade power plasma for cutting 10mm thickness metal @500mm/min
-
Application:
Home workshop
Metal workshops
Light fabrication,
Repair and maintenance -
These Materials:
Mild Steel
Brass
Copper
Aluminum -
Input Power: 200-240V, 1-Phase
Amperage Range: 30-60A
Rated Output at 40℃ (104℉):
60A at 110V @60% Duty Cycle
Weight: 19KG
ADVANTAGES
-
Maximum productivity
Cutting 10mm @500mm/min ensures the maximum productivity (optional torch).
Finish jobs much faster with cut speeds greater than oxyfuel.
-
Easy-to-use with versatile design
Very easy to use, even for first time operators.
Non-HF type available: Starts without high-frequency so it will not have electromagnetic interfere.
Tackle different jobs with multiple, easy-to-use torches.
-
Low operating cost
Reduce costs with long consumable life and more uptime.
High power efficiency lowers energy consumption..
-
Rugged and reliable
TOPWELL Certified reliability ensures performance in the most demanding environment.
Powercool design cools internal components more effectively for long system life and improved uptime.
General View of Control Panel
-
1.Ammeter/Voltmeter Display
2.Encoder Control
3.Gas supply problem
4.Over heat/Over loading
5.Power LED
Non-HF Arc Ignition system
- Torch off.
- By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.
- The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc.
- By positioning the torch on the part to be cut, theplasma arc will strike.
Torches with pilot arc cut in without high frequency.
Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and computer systems in the vicinity of the cutting positions.
Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparson with other torches(without high frequency) on the market,with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters).
-
-
Item No CUT-60Di Input voltages (±15%) 200–240V, 1-PH, 50-60Hz Max Input current 200/240V, 48/40A Output current 30-60A Rated output voltage 104V Duty cycle @ 40° C (104° F) 60% @60A 100% @40A Open circuit voltage (OCV) 280V Dimensions 540x240x480mm Weight 19kg Gas supply Air (clean, dry and oil-free) Recommended gas inlet flow rate/pressure 0.3-0.5Mpa Power supply type Inverter – IGBT Electrical efficiency 80% Max. Load Power Capacity 9.7KVA Certifications CE, RoHS Warranty Power supply: 3-year Torch: 1-year - ACCESSORIES
PLASMA torch: CB70
Current: 70A
Duty Cycle 60%: 70A
Gas Pressure: 4.5- 5.0Bar
Gas Flow: 130L/min
Ignition: HF
PLASMA torch: PT-60
Current: 10-60A
Duty Cycle 60%: 60A
Air pressure: 5.0Bar
Gas Flow: 150L/min
Ignition: Without HF
PLASMA torch: P80
Current: 80A
Duty Cycle 60%: 80A
Gas Pressure: 4.5-5.0Bar
Gas Flow: 220L/min
Ignition:HF
PLASMA torch: PT-80
Current: 30-80A
Duty Cycle 60%: 80A
Air pressure: 5.0Bar
Gas Flow: 160L/min
Ignition: Without HF
-
-
Q:Are you a factory or a trading company?
A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.
Q:How can I pay my order?
A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.
Q:How about your warranty?
A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.
Q: Do you have a CE certificate?
A: For every model of machine, it has a CE certificate.
Q:How can I get the quotation?
A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly
